Davey HP 45-05T (70 LPM Max Flow, 330 kPa Max Pressure)
Davey HP series performance curves for HP45-05T, HP65-06T and HP85-08T
Davey HP series performance curves for HP45-05T, HP65-06T and HP85-08T
Davey HP 45-05T (70 LPM Max Flow, 330 kPa Max Pressure)
Davey HP series performance curves for HP45-05T, HP65-06T and HP85-08T

DAVEY HP45-05T PRESSURE PUMP WITH TORRIUM2

The Davey HP45-05T supplies clean water automatically for household taps, showers and garden watering. Its twin-stage pump builds pressure for household water supply and garden irrigation. The supplied Torrium2 controller senses pressure and flow, starts the pump as water is used and reduces repeated starts during very low demand.

✓ Maximum flow: 70 LPM
✓ Maximum total head: approximately 33m
✓ Inlet: 1 1/4" BSP female thread
✓ outlet: 1" BSP male thread
✓ Maximum system pressure: 450kPa
✓ Water: clean, without fibres or solids; 1°C to 50°C
✓ Power supply: 220-240V single phase, 50Hz

Davey HP45-05T & HP65-06T Specifications
Davey Torrium2 Controller Specifications
Davey Torrium2 Installation & Operating Instructions

Davey HP 45-05T (70 LPM Max Flow, 330 kPa Max Pressure)

The Davey HP45-05T is a twin-stage centrifugal pressure pump for household water supply, irrigation, water transfer and washing systems. It delivers up to 70 LPM with a maximum total head of approximately 33m read from its performance curve. Actual flow depends on vertical lift and pipe resistance and decreases as head increases.

The pump has a 1 1/4" BSP female thread inlet and supplies water through a 1" BSP male Torrium2 system outlet. It is designed for clean, non-volatile liquids without fibres or solids, at water temperatures from 1°C to 50°C.

The supplied Torrium2 controller automatically starts the pump when water pressure falls and stops it when water demand ends. It automatically sets the starting pressure to suit the pump and installation, adapting during very low demand to reduce repeated starts. Its built-in accumulator allows a small amount of water to be drawn before the pump restarts.

Loss-of-prime protection stops the pump if its water supply is lost, with automatic retry to check whether water has returned. The controller also provides high-water-temperature and excessive-current cut-outs. The motor has its own automatic-reset thermal overload protection.

Two impeller stages develop pressure inside a 304 stainless steel pump casing and backplate. The impellers are glass-filled polycarbonate, with a glass-filled Noryl stage body. A ceramic/carbon mechanical seal and nitrile O-rings seal the pump.

Install horizontally on a firm base in a ventilated, weather-protected position with drainage. Fill the pump casing and suction line with water before starting. Suction-lift installations require a foot valve to retain prime. The maximum suction lift is 6m; actual performance depends on the suction pipework and installation.

The complete system has a maximum system pressure of 450kPa. Its 220-240V single-phase motor provides 0.55kW output power from 0.77kW input power.

Two-year Davey warranty, subject to its terms.

Davey HP45-05T & HP65-06T Specifications
Davey Torrium2 Controller Specifications
Davey Torrium2 Installation & Operating Instructions

✓ Application
The Davey HP45-05T is a twin-stage centrifugal pressure pump for household water supply, irrigation, water transfer and washing systems.

✓ Warranty
Two-year Davey warranty, subject to its terms.

✓ Connections
Pump inlet: 1 1/4" BSP female thread.
System outlet through Torrium2: 1" BSP male thread.
Torrium2 provides horizontal and vertical outlet connections.

✓ Performance
Maximum flow: 70 LPM.
Maximum total head: approximately 33m.
Flow decreases as head increases.
Approximate readings from the 50Hz performance curve:
20 LPM: approximately 32m total head.
40 LPM: approximately 29m total head.
60 LPM: approximately 22m total head.
Expected flow depends on vertical lift and pipe resistance.

✓ Automatic Control
Torrium2 uses pressure and flow sensors to start the pump when pressure falls and stop it when water demand ends. It normally restarts at approximately 80% of the previous shut-off pressure and adapts the start pressure during very low demand to reduce repeated starts. A built-in spring-loaded accumulator provides a small amount of draw-off water.

✓ Pump & Motor Protection
Loss-of-prime protection stops the pump if its water supply is lost, with automatic retry to check whether water has returned. The controller also provides high-water-temperature and excessive-current cut-outs. The motor has its own automatic-reset thermal overload protection.

✓ Pressure Limits
Maximum system pressure: 450kPa.

✓ Water Supply
Water temperature: 1°C to 50°C.

✓ Installation & Priming
Install horizontally on a firm base in a ventilated, weather-protected position with drainage. Fill the pump casing and suction line with water before starting. Suction-lift installations require a foot valve to retain prime. The maximum suction lift is 6m; actual performance depends on the suction pipework and installation.

✓ Construction
Pump casing and backplate: 304 stainless steel.
Stage body: glass-filled Noryl.
Impeller: glass-filled polycarbonate.
Pump shaft: 303 stainless steel.
Mechanical seal: ceramic stationary ring and carbon rotating ring.
O-rings: nitrile rubber.
Motor shell: marine-grade aluminium with baked polyester finish.
Torrium2 housing: glass-fibre-reinforced nylon.

✓ Electrical Supply
Maximum ambient temperature: 50°C.
220-240V single phase, 50Hz.
Nominal motor speed: 2850rpm.
Input power P1: 0.77kW.
Motor output power P2: 0.55kW.
Full-load current: 3.4A.
Locked-rotor current: 12A.
Permanent split capacitor starting.
Motor enclosure: IP55.
Motor insulation: Class F.
Torrium2 controller enclosure: IP56.
Controller power lead: 2m with Australian three-pin plug.

✓ Application & Pump Type
Twin-stage centrifugal pressure pump for household water supply, irrigation, water transfer, washing systems and pressure boosting.
For clean, non-volatile liquids without fibres or solids.

✓ Dimensions & Weight
Overall length: 329mm.
Overall width: 170mm.
Overall height: 328mm.
Net weight: 9kg.
Mounting: two 10mm holes at 140mm centres.

Recently viewed