Drip Line Netafim Techline 13mm 1.60 LPH 30cm PC 200M
Drip Line Netafim Techline 13mm 1.60 LPH 30cm PC 200M

NETAFIM TECHLINE AS 13MM DRIP LINE 200M

This 200m coil of Netafim Techline AS waters garden beds and landscaped areas through built-in drippers spaced every 30cm. Pressure compensation helps keep watering even as pressure changes. The UV-resistant low density poly tube suits surface and subsurface installation, with an anti-siphon mechanism to help prevent soil entering the outlets when watering stops.

✓ Tube size: 13mm
✓ Dripper spacing: 30cm
✓ Flow per dripper: 1.6L/h
✓ Operating pressure: 40-300kPa
✓ Coil length: 200m
✓ Maximum run: 92m at 150kPa on flat ground

Netafim Techline AS Specifications

Drip Line Netafim Techline 13mm 1.60 LPH 30cm PC 200M

This 200m coil of Netafim Techline AS is brown low density poly dripline with built-in 1.6 litres per hour drippers at 30cm spacing. It suits garden beds, shrubs and landscaped areas, with surface or subsurface installation.

Pressure compensation helps maintain consistent dripper output within the 40-300kPa operating range. The anti-siphon mechanism helps prevent soil being drawn into the drippers as the system drains after shut-off. A large inlet filter and mechanical root barrier help protect the drippers from clogging and root intrusion.

The UV-resistant tube has a brown outer layer over black polyethylene. It connects using suitable 13mm barbed fittings secured with compatible clamps. Supply-water filtration to 130 micron / 120 mesh is recommended.

The 200m coil can be cut to form separate watering runs. Coil length is the amount of tube supplied, rather than the maximum length of one run. For this 1.6L/h model at 30cm spacing, the maximum run on flat ground is 92m at 150kPa inlet pressure or 104m at 200kPa. These limits retain at least 40kPa at the end of the run.

Netafim Techline AS Specifications

✓ Dripline Configuration
Netafim Techline AS.
Nominal tube size: 13mm.
Dripper flow: 1.6 litres per hour.
Dripper spacing: 30cm.
Coil length: 200m.
Manufacturer code: 17380-002700.

✓ Pressure & Filtration
Operating pressure: 40-300kPa.
Recommended supply-water filtration: 130 micron / 120 mesh.

✓ Maximum Run Length
For 1.6 litres per hour drippers at 30cm spacing on flat ground.
100kPa inlet pressure: 74m.
150kPa inlet pressure: 92m.
200kPa inlet pressure: 104m.
250kPa inlet pressure: 114m.
300kPa inlet pressure: 123m.
Minimum residual pressure at the end of the run: 40kPa.
Coil length does not determine allowable run length.

✓ Construction & Dimensions
UV-resistant low density polyethylene.
Brown outer layer over black tube.
Outside diameter: 15.3mm.
Inside diameter: 12.9mm.
Pressure-compensating drippers with anti-siphon mechanism.
Large dripper inlet filter and mechanical root barrier.

✓ Connections & Installation
Suitable 13mm barbed fittings with compatible clamps.
Surface and subsurface applications.

Recently viewed