Compression Poly Metric Joiner- Poly x Poly - 75 mm x 75 mm - Norma
Compression Poly Metric Joiner- Poly x Poly - 75 mm x 75 mm - Norma

POLY COMPRESSION METRIC JOINER POLY X POLY 75MM X 75MM - NORMA

Poly compression metric joiner 75mm x 75mm - NORMA used to connect two lengths of 75mm PE metric pipe in irrigation, rural water and general PE pipe systems.

✓ 75mm x 75mm Metric Joiner
✓ Poly x Poly Connection
✓ Suits PE Metric Pipe
✓ WaterMark Approved
✓ Pressure Rating 1250kPa
✓ Check Pipe Size Before Ordering

Norma Metric Compression Fittings Brochure

More Information
Product Specifications
Compression Poly Metric Joiner- Poly x Poly - 75 mm x 75 mm - Norma
POLY COMPRESSION METRIC JOINER POLY X POLY 75MM X 75MM - NORMA
Compression Poly Metric Joiner- Poly x Poly - 63 mm x 63 mm - Norma
Compression Poly Metric Joiner- Poly x Poly - 63 mm x 63 mm - Norma CONMJ06363
$28.22 /each
Compression Poly Metric Joiner- Poly x Poly - 75 mm x 75 mm - Norma
Compression Poly Metric Joiner- Poly x Poly - 75 mm x 75 mm - Norma CONMJ07575
$60.25 /each
Compression Poly Metric Joiner- Poly x Poly - 90 mm x 90 mm - Norma
Compression Poly Metric Joiner- Poly x Poly - 90 mm x 90 mm - Norma CONMJ09090
$92.07 /each
Compression Poly Metric Joiner- Poly x Poly - 110 mm x 110 mm - Norma
Compression Poly Metric Joiner- Poly x Poly - 110 mm x 110 mm - Norma CONMJ110110
$152.61 /each

Poly compression metric joiner poly x poly 75mm x 75mm - NORMA is used to connect two lengths of 75mm PE metric pipe in irrigation, rural water, mains water connection and general PE pipe systems. It provides a straight compression connection where 75mm metric poly pipe needs to be joined.

This 75mm NORMA metric joiner suits PE metric pipe made in accordance with AS/NZS 4130. It uses blue metric identification ends and an easy insertion compression design. The 75mm size is rated to 1250kPa. Confirm the pipe size, pressure rating and application requirements before ordering.

Norma Metric Compression Fittings Brochure

✓ Product Type & Size
Poly compression metric joiner, poly x poly, 75mm x 75mm.

✓ Connection
75mm poly x 75mm poly metric compression connection.

✓ Application
Used to connect two lengths of 75mm PE metric pipe.

✓ Pipe Compatibility
Suitable for PE metric pipe made in accordance with AS/NZS 4130.

✓ Pressure Rating
1250kPa.

✓ Approval
WaterMark approved.

✓ Installation
Cut pipe square, deburr if required, mark the insertion depth, insert the pipe fully and tighten the nut until the mark is only just visible.

✓ Material
Polypropylene copolymer body, nut and holder with NBR metric O-ring and acetal clinching ring.

✓ Suitable Use
Suitable for irrigation, rural water, mains water connection and general PE metric pipe systems where the fitting size, pressure rating and installation requirements suit the application.

You may also like

Recently viewed