Compression Poly Metric End Connector- Poly x FI BSP - 50mm x 2"
Compression Poly Metric End Connector- Poly x FI BSP - 50mm x 2"

POLY 3G COMPRESSION METRIC END CONNECTOR POLY X FEMALE BSP 50MM X 2"

Philmac 3G metric female end connector 50mm x 2" with a compression connection and an internal female BSP thread. Tough thermoplastic construction resists impact, UV exposure and corrosion for long service life in water supply and irrigation systems. The pre-assembled Slide & Tighten connection makes installation straightforward.

✓ Fitting System: Philmac 3G
✓ Connections: A compression connection and an internal female BSP thread
✓ Pipe: Metric PE pipe, sized by outside diameter
✓ Pressure Rating: PN16 / 1600kPa.

Philmac 3G Compression Metric Technical Manual
Philmac EasyLOK Compression Metric Technical Manual
Philmac Compression Metric Installation Guide

Compression Poly Metric End Connector- Poly x FI BSP - 50mm x 2"

Philmac 3G metric female end connector for metric poly pipe, with a compression connection and an internal female BSP thread. Tough thermoplastic construction resists impact, UV exposure and corrosion for long service life in water supply and irrigation systems.

The pre-assembled 3G connection uses Slide & Tighten installation, with no pipe chamfering or lubrication required. The nut meets the body flange when fully tightened.

The BSP thread mates with a matching male BSP thread. Pipe size and thread size describe different parts of the fitting; select each to suit the connection. Follow the manufacturer’s instructions for thread sealing and tightening.

Philmac 3G Compression Metric Technical Manual
Philmac EasyLOK Compression Metric Technical Manual
Philmac Compression Metric Installation Guide

✓ Product Type & Size
Compression Poly Metric End Connector- Poly x FI BSP - 50mm x 2"

✓ Connection
Poly compression x female BSP threaded connection.

✓ Application
Used to connect 50mm metric PE pipe to a 2" male BSP threaded fitting, riser, valve or pipework.

✓ Pipe Compatibility
Suitable for metric PE pipe.

✓ Pressure Rating
PN16 / 1600kPa.

✓ Installation
3G Slide & Tighten installation. Cut pipe square before installation, insert the pipe until the stop is felt, then tighten the nut to the fitting body. A wrench or multigrips may be required on larger 3G sizes. Use PTFE tape or suitable thread sealant on the BSP threaded connection.

✓ Fitting Style
Pre-assembled compression fitting.

Video 1

Video 2

Recently viewed