Compression Poly Metric End Cap 50mm
Compression Poly Metric End Cap 50mm

POLY 3G COMPRESSION METRIC END CAP 50MM

Poly 3G compression metric end cap used to blank off the end of 50mm metric PE pipe. Suitable for irrigation, rural water and general water supply systems where the fitting size and pressure rating suit the installation.

✓ 50mm Compression Metric End Cap
✓ Blanks Off Metric PE Pipe
✓ 3G Slide & Tighten Installation
✓ PN16 / 1600kPa Pressure Rating
✓ Pre-Assembled Fitting
✓ Check Pipe Size Before Ordering

Philmac 3G Compression Metric Technical Manual

Philmac EasyLOK Compression Metric Technical Manual

Philmac Compression Metric Installation Guide

More Information
Product Specifications
Product Videos
Compression Poly Metric End Cap 50mm
POLY 3G COMPRESSION METRIC END CAP 50MM
Compression Poly Metric End Cap 20mm
Compression Poly Metric End Cap 20mm COMEC20
$6.75 /each
Compression Poly Metric End Cap 25mm
Compression Poly Metric End Cap 25mm COMEC25
$7.32 /each
Compression Poly Metric End Cap 32mm
Compression Poly Metric End Cap 32mm COMEC32
$10.03 /each
Compression Poly Metric End Cap 40mm
Compression Poly Metric End Cap 40mm COMEC40
$14.72 /each
Compression Poly Metric End Cap 50mm
Compression Poly Metric End Cap 50mm COMEC50
$22.93 /each
Compression Poly Metric End Cap 63mm
Compression Poly Metric End Cap 63mm COMEC63
$32.43 /each
Compression Poly Metric End Cap 75mm
Compression Poly Metric End Cap 75mm COMEC75
$69.16 /each
Compression Poly Metric End Cap 90mm
Compression Poly Metric End Cap 90mm COMEC90
$96.93 /each
Compression Poly Metric End Cap 110mm
Compression Poly Metric End Cap 110mm COMEC110
$166.88 /each

Poly 3G compression metric end cap 50mm is used to blank off the end of 50mm metric PE pipe in irrigation, rural water and general water supply systems. It provides a compression end seal where a 50mm pipe run needs to be temporarily or permanently capped.

This 50mm end cap uses 3G Slide & Tighten installation and is supplied pre-assembled for fitting onto metric poly pipe. Cut the pipe square before installation and confirm the pipe size, pressure rating and application requirements before ordering.

Philmac 3G Compression Metric Technical Manual

Philmac EasyLOK Compression Metric Technical Manual

Philmac Compression Metric Installation Guide

✓ Product Type & Size
Poly 3G compression metric end cap, 50mm.

✓ Connection
Poly compression end cap.

✓ Application
Used to blank off the end of 50mm metric PE pipe.

✓ Pipe Compatibility
Suitable for metric PE pipe.

✓ Pressure Rating
PN16 / 1600kPa.

✓ Installation
3G Slide & Tighten installation. Cut pipe square before installation, insert the pipe until the stop is felt, then tighten the nut to the fitting body. A wrench or multigrips may be required on larger 3G sizes.

✓ Fitting Style
Pre-assembled compression fitting.

✓ Suitable Use
Suitable for irrigation, rural water and general water supply systems where the fitting size, pipe type and pressure rating suit the installation.

Video 1

Video 2

You may also like

Recently viewed