Hep2O/Waterlink Push Fit Spigot Reducer 22mm x 18mm
Hep2O/Waterlink Push Fit Spigot Reducer 22mm x 18mm

HEP2O / WATERLINK PUSH FIT SPIGOT REDUCER 22MM X 18MM

HEP2O / WaterLink push fit spigot reducer 22mm x 18mm for reducing compatible polybutylene pipework in hot and cold water plumbing installations.

✓ 22mm x 18mm Spigot Reducer
✓ Push Fit Reducer Connection
✓ Suits HEP2O / WaterLink Pipe Systems
✓ For Polybutylene Plumbing Pipe
✓ Hot and Cold Water Reticulation
✓ Support Sleeve Required for Pipe Connection

Hep2O / Waterlink Fitting Installation Guide and Specifications

More Information
Product Specifications
Hep2O/Waterlink Push Fit Spigot Reducer 22mm x 18mm
HEP2O / WATERLINK PUSH FIT SPIGOT REDUCER 22MM X 18MM
Hep2O/Waterlink Push Fit Spigot Reducer 18mm x 15mm
Hep2O/Waterlink Push Fit Spigot Reducer 18mm x 15mm CRH2OPFSR1815
$3.23 /each
Hep2O/Waterlink Push Fit Spigot Reducer 22mm x 18mm
Hep2O/Waterlink Push Fit Spigot Reducer 22mm x 18mm CRH2OPFSR2218
$4.67 /each

HEP2O / WaterLink push fit spigot reducer 22mm x 18mm is used to reduce from 22mm to 18mm in compatible polybutylene hot and cold water plumbing systems. It is suitable where a HEP2O / WaterLink pipe run needs to transition down to a smaller pipe size.

This reducer is part of the HEP2O / WaterLink push-fit plumbing system and is listed as HEP2.22.18 in the Hep2O catalogue and WLP2.22.18 in the WaterLink catalogue. Support sleeves are required when connecting polybutylene pipe. Confirm pipe size, reducer orientation and system suitability before ordering.

Hep2O / Waterlink Fitting Installation Guide and Specifications

✓ Product Type & Size
HEP2O / WaterLink push fit spigot reducer, 22mm x 18mm.

✓ Connection
Push-fit reducer connection.

✓ System Compatibility
Suitable for compatible HEP2O / WaterLink polybutylene pipe systems.

✓ Catalogue Reference
Listed as HEP2.22.18 in the Hep2O catalogue and WLP2.22.18 in the WaterLink catalogue.

✓ Application
Suitable for hot and cold water plumbing installations where the pipe size, reducer size, pressure rating and temperature rating suit the installation.

✓ Support Sleeve Requirement
Support sleeves are required when connecting polybutylene pipe.

✓ Installation Note
Use purpose-designed pipe cutters, ensure the pipe end is clean and free from burrs, insert the correct support sleeve, push the pipe fully into the fitting and tug back to confirm the grab ring has engaged.

✓ Compliance Note
Install in accordance with AS/NZS 3500 and relevant local plumbing requirements.

You may also like

Recently viewed