Pipe Hep2O/Waterlink Coil 22mm x 25 metre
Pipe Hep2O/Waterlink Coil 22mm x 25 metre

PIPE HEP2O / WATERLINK COIL 22MM X 25 METRE

HEP2O / WaterLink 22mm x 25 metre polybutylene pipe coil for compatible hot and cold water plumbing installations.

✓ 22mm Polybutylene Pipe
✓ 25 Metre Coil
✓ Suits HEP2O / WaterLink Push-Fit Systems
✓ For Hot and Cold Water Reticulation
✓ Use with Compatible 22mm Fittings
✓ Support Sleeve Required for Fitting Connection

Hep2O / Waterlink Fitting Installation Guide and Specifications

More Information
Product Specifications
Pipe Hep2O/Waterlink Coil 22mm x 25 metre
PIPE HEP2O / WATERLINK COIL 22MM X 25 METRE
Pipe Hep2O/Waterlink Coil 18mm x 5 metre
Pipe Hep2O/Waterlink Coil 18mm x 5 metre PH201805
$13.61 /each
Pipe Hep2O/Waterlink Coil 18mm x 25 metre
Pipe Hep2O/Waterlink Coil 18mm x 25 metre PH201825
$87.29 /each
Pipe Hep2O/Waterlink Length 22mm x 5 metre
Pipe Hep2O/Waterlink Length 22mm x 5 metre PH202205
$25.25 /each
Pipe Hep2O/Waterlink Coil 22mm x 25 metre
Pipe Hep2O/Waterlink Coil 22mm x 25 metre PH202225
$127.55 /each

HEP2O / WaterLink 22mm x 25 metre polybutylene pipe coil is used in compatible hot and cold water plumbing installations. The coil format is suited to pipe runs where flexible polybutylene pipe can be routed into position with fewer joints.

This pipe is part of the HEP2O / WaterLink push-fit plumbing system and suits compatible 22mm fittings. Support sleeves are required when connecting the pipe to HEP2O / WaterLink push-fit fittings. Confirm pipe size, coil length, pressure-temperature suitability and installation requirements before ordering.

Hep2O / Waterlink Fitting Installation Guide and Specifications

✓ Product Type & Size
HEP2O / WaterLink polybutylene pipe, 22mm x 25 metre coil.

✓ Pipe Format
Straight coil.

✓ System Compatibility
Suitable for compatible HEP2O / WaterLink push-fit plumbing systems.

✓ Catalogue Reference
Listed as HEPSC25.22 in the Hep2O catalogue and WLSC25.22 in the WaterLink catalogue.

✓ Application
Suitable for hot and cold water plumbing installations where the pipe size, pressure rating and temperature rating suit the installation.

✓ Support Sleeve Requirement
Support sleeves are required when connecting polybutylene pipe to compatible HEP2O / WaterLink push-fit fittings.

✓ Installation Note
Use purpose-designed pipe cutters, ensure the pipe end is clean and free from burrs, insert the correct support sleeve before jointing and confirm correct insertion depth into the fitting.

✓ Compliance Note
Install in accordance with AS/NZS 3500 and relevant local plumbing requirements.

You may also like

Recently viewed