Perth Irrigation - Retic Fittings , Plumbing Fittings, Reticulation Supplies, Western Australia

Netafim PRV Pressure Regulating Valve

Product Specifications

Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.

NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.

A. Netafim Inline PRV Series.
20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
Flow rate : 0.94 to 16.6 litres per minute.

B. Netafim PRV 2000 Series. Higher flow.
20mm (3/4”) female BSP thread inlet. 20mm (3/4”) male BSP thread outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
Flow rate : 13.2 to 66.6 litres per minute.